Valorant Sensitivity Guide: Find Your Best Settings in 2026
Stop guessing. This guide gives you a concrete starting sensitivity right now, explains why Valorant numbers look tiny compared to other games, and walks you through a structured process to lock in your ideal eDPI — whether you're grinding Gold or pushing Diamond.
Your Starting Point — Set This Right Now
800 DPI · 0.35 In-Game Sensitivity = 280 eDPI
This is the upper end of the competitive pro range and the best default for most players. It gives you enough speed for reactive plays while keeping spray control manageable. Use the Valorant eDPI calculator to verify your own combo instantly, then read on to tune from there.
Table of Contents
1. Understanding Valorant's Sensitivity System
Valorant's sensitivity scale looks confusingly small because the game applies a 0.07 sensitivity multiplier — one of the lowest in any major FPS. CS2 uses 0.022. Apex Legends uses 0.022. This means a setting of 1.0 in Valorant spins your camera roughly 3.18× farther than a 1.0 in CS2.
The practical result: most Valorant players use in-game sensitivities between 0.20 and 0.50, which look absurdly low if you're used to other games. They are not low — they represent the same physical mousepad distance. The number is just scaled differently.
The Formula That Matters
eDPI = DPI × In-Game Sensitivity
eDPI (effective DPI) is the single number that describes how fast your crosshair moves, regardless of which DPI/sensitivity combination you use. 800 DPI × 0.35 sens = 280 eDPI. 400 DPI × 0.70 sens = 280 eDPI. They feel identical. Learn more about what eDPI is →
cm/360° is the measurement pros and coaches actually use — how many centimeters of mousepad travel it takes to spin a full 360°. Most Valorant pros sit at 35–55 cm/360°, corresponding to roughly 200–280 eDPI. A higher cm/360° value means a slower, more precise sensitivity.
Coming from CS2 or Apex? Use the sensitivity converter to carry over your exact feel rather than guessing. The multiplier difference will fool you every time.
2. The Competitive eDPI Range for Valorant
Analysis of VCT pro settings consistently shows 200–280 eDPI as the dominant range — the median lands around 240 eDPI. Notable examples: Aspas uses 800 DPI / 0.28 (224 eDPI), cNed uses 400 DPI / 0.78 (312 eDPI), and TenZ plays at 800 DPI / 0.408 (~326 eDPI). TenZ is a notable outlier at the high end, sustained by elite innate precision. The practical competitive range is 200–320 eDPI.
The table below shows DPI and in-game sensitivity combos that all land at the same eDPI target. Pick the row that matches your mouse's native DPI — the feel is physically identical.
| DPI | In-Game Sens | eDPI | cm/360° | Notes |
|---|---|---|---|---|
| 400 | 0.50 | 200 | 130.3 | Low — pro standard range |
| 400 | 0.63 | 252 | 103.1 | Low-mid sweet spot |
| 800 | 0.25 | 200 | 130.3 | Low — most common pro combo |
| 800 | 0.32 | 256 | 101.7 | Low-mid sweet spot |
| 800 | 0.35 | 280 | 93.1 | Recommended starting point |
| 1600 | 0.16 | 256 | 101.7 | Same feel as 800 DPI / 0.32 |
| 1600 | 0.18 | 288 | 89.8 | High-DPI equivalent of ~0.36 @ 800 |
cm/360° calculated using Valorant's 0.07 multiplier: (2.54 × 360) ÷ (eDPI × 0.07). Verify your own numbers with the Valorant eDPI calculator.
3. How to Find YOUR Optimal Sensitivity
"Just try different sensitivities" is not a process — it's how you stay stuck for months. Here is a structured method that produces a reliable answer.
Step 1 — Set 280 eDPI as your baseline
Set your mouse to 800 DPI and Valorant sensitivity to 0.35. (400 DPI users: set 0.70. 1600 DPI users: set 0.175.) Open the Range and spend 15 minutes clicking bots at varying distances. Do not judge yet — just get a feel for the speed.
Step 2 — The still-target test
In the Range, aim at a stationary bot from medium distance. Flick directly to three different bot heads in sequence. Consistently overshooting (landing past the target and correcting back) means sensitivity is too high. Consistently undershooting usually means crosshair placement needs work first — fix that before lowering sensitivity.
Step 3 — The tracking test
Use the moving bot mode in the Range or an aim trainer (Aimlabs / KovaaK's). Track a moving target for 60 seconds. Constantly over-correcting and jerking past the target — lower eDPI by 10%. Feeling like you're always chasing and can't keep up — raise by 10%. One variable at a time.
Step 4 — Give it 5+ hours before judging
Muscle memory takes time. A new sensitivity will feel wrong for the first 2–3 hours even if it's objectively better. Run at least 5 hours of deliberate deathmatch or aim trainer practice — not ranked — before making another change. Track your headshot percentage and first-blood rate. If both are trending up after 5 hours, lock it in for another 5 before re-evaluating.
Critical rule: Only change one variable at a time. Never change DPI and in-game sensitivity simultaneously. Never adjust during a tilt session — you'll over-correct into settings that only felt "right" because you were already playing badly.
4. Check Your Settings Right Now
Enter your current DPI and Valorant in-game sensitivity to see your eDPI and cm/360° instantly.
eDPI
280
cm / 360°
46.7
Assessment
Competitive Sweet Spot
Competitive Sweet Spot — used by most Valorant pros
5. Sensitivity by Playstyle
Valorant's design rewards precision 1-taps and burst fire over spray, so the entire competitive range skews lower than most FPS games. Your role and playstyle push you toward different ends of the 200–320 eDPI band.
You take fast duels at short-to-medium range and make quick micro-flicks to punish peekers. A slightly higher eDPI (260–280) lets you swing corners and re-aim faster. Going above 300 makes spray control on Vandal/Phantom harder to sustain. TenZ's ~326 eDPI is a notable outlier — matched by an XL pad and exceptional innate aim.
You hold angles and rely on precision over raw reaction speed. Lower sensitivity rewards deliberate movement and maximizes accuracy on stationary or slow-moving targets. The tradeoff — sluggish 180° turns — rarely matters given how these roles are played.
Operator shots are unforgiving — a tiny over-flick at the moment of fire means a miss. Lower sensitivity (combined with a fine-tuned ADS multiplier) gives you the precision needed for consistent one-shot hits. Many dedicated Operator players drop to 200 eDPI or below and compensate with wider arm movements.
6. ADS Sensitivity — What to Set and Why
Valorant has a dedicated ADS (Aim Down Sights) sensitivity multiplier separate from your hip-fire sensitivity. The default is 1.0, meaning your scoped sensitivity exactly matches your hip-fire sensitivity.
Recommendation: leave it at 1.0. When ADS speed matches hip-fire speed, your brain builds a single targeting motion for every engagement. Changing the multiplier introduces a second muscle memory that activates on right-click, which creates a split-second hesitation in fast duels.
The one exception
If you main the Operator and consistently overshoot when scoping in, lower your ADS multiplier to 0.80–0.85. This slows your scoped sensitivity by 15–20% without touching hip-fire. Make this change only after your hip-fire sensitivity is fully locked in.
To verify your hip-fire and scoped sensitivities stay close, use the eDPI calculator. Multiply your eDPI by your ADS multiplier to get your effective scoped eDPI. Aim for the two values to stay within 20% of each other.
7. Common Valorant Sensitivity Mistakes
Copying pro settings without matching their physical setup
"TenZ uses 800 DPI, 0.408 sens" is only half the picture. What matters is his ~326 eDPI and the ~100 cm XL mousepad that makes it physically usable. If your pad is 30 cm wide, 326 eDPI means you can't do a full 180 without lifting the mouse. Match the eDPI and cm/360° to your pad size, not the raw settings number.
Changing sensitivity after every bad session
One 2/12 game is noise. Constant changes prevent muscle memory from forming at all — you'll always feel "off" because your nervous system never had time to consolidate the movement pattern. Set a sensitivity, commit to 5 hours minimum, then decide with data.
Leaving Windows mouse acceleration on
Windows "Enhance pointer precision" makes cursor speed vary with physical mouse speed. It directly destroys muscle memory. Disable it: Windows Settings → Bluetooth & devices → Mouse → Additional mouse settings → Pointer Options → uncheck "Enhance pointer precision." Set Windows pointer speed to exactly 6/11 (the only notch with true 1:1 DPI tracking).
Running above 400 eDPI in Valorant
Valorant's recoil patterns require microadjustments after the first shot on Vandal and Phantom. Above 400 eDPI, those microadjustments become nearly impossible to execute consistently. If your eDPI is above 400 and your spray control is unreliable, sensitivity is the first variable to fix — before crosshair placement, before game sense.
FAQ
Ready to Lock In Your Settings?
Use the free tools below to calculate your eDPI, convert from another game, or explore sensitivity combos — no signup required.
Related Guides
What is eDPI? Complete Explanation
The definitive breakdown of effective DPI and why it's the only sensitivity number that matters.
Valorant to CS2 Sensitivity Conversion
Exact formula and worked examples for carrying your feel between the two biggest FPS titles.
Low vs. High Sensitivity — Which Is Better?
Data-backed breakdown of the real tradeoffs and which playstyle benefits from each end of the range.
Perfect Sensitivity Guide (All Games)
Step-by-step 7-day method to find your ideal sensitivity for any FPS, not just Valorant.